Acrylic-based paints
Acrylic-based paint is very flexible and gives you excellent coverage.
Regacryl
Decorative paint
Field of Application
Exterior:
For application on:
· Concrete complying with standard NF P 18-210 (Ref: DTU 23.1).
· Concrete coated with Ragrecim or Ragrefix.
· Hydraulic-based coating in accordance with standard NF P 15.201 (Ref. DTU 26.1). Cement'in C+G or Cement'in MEGA Plus.
· Organic coatings: Graniroc KR, RP
Interior:
· Concrete complying with standard NF P 18-210 (Ref: DTU 23.1) or finished concrete.
· masonry in bricks, blocks and concrete, silico-calcareous mass or cellular concrete.
· hydraulic coating such as Granicem, Cement'in, Ragrefix, Ragrecim, etc.
· organic coatings such as Graniroc KR, RP on plaster-based media.
For application on:
· Concrete complying with standard NF P 18-210 (Ref: DTU 23.1).
· Concrete coated with Ragrecim or Ragrefix.
· Hydraulic-based coating in accordance with standard NF P 15.201 (Ref. DTU 26.1). Cement'in C+G or Cement'in MEGA Plus.
· Organic coatings: Graniroc KR, RP
Interior:
· Concrete complying with standard NF P 18-210 (Ref: DTU 23.1) or finished concrete.
· masonry in bricks, blocks and concrete, silico-calcareous mass or cellular concrete.
· hydraulic coating such as Granicem, Cement'in, Ragrefix, Ragrecim, etc.
· organic coatings such as Graniroc KR, RP on plaster-based media.
Composition
Regacryl is a dispersion based on acrylic copolymer resin, pigments, additives and inert loads. Non-toxic product.
Characteristics
Regacryl is a decorative paint in an aqueous phase for exterior and interior walls. Regacryl is available in a large range of colours.
Preparation substrate
Substrates should be sound, clean, dust-free and dry. While being applied and during hardening the ambient temperature and that of the substrate may not be lower than 5°C nor higher than 30°C. Paint should not be applied to a surface in the process of thawing or at risk of frost in the hours after application.
Application
Regacryl is applied in two layers using a brush, a roller or spray gun. Space out the layers by 6 to 7 hours depending on the temperatures and humidity. Clean tools in water with added detergent.
Consumption
≥ 400 g/m² in two layers.
Technical data
Density:
1,50 - 1,55 kg/dm³
Dry extract:
± 65%
Drying time (dry-mounted):
30 min. to 1 hour
Drying time (dry):
5 hours
Packaging
Regacryl is available in 6, 12 or 20 kg buckets. The shelf life is 12 months, stored in the original packaging away from frost and severe heat.
Remarks
The work done with our paint must comply with standard industrial practice and must respect the stipulations set by the Construction Scientific and Technical Centre (CSTC) and the French standard NF P74-201 Ref: DTU n° 59.1.
Classification
Family I, Class 7b2 in accordance with the NF T 36-005 standard. Compliant with the stipulations of standard NFP 74-201 Ref DTU 59.1
EU VOC limit value for this product (cat A / c WB): 40 g / L
This product contains a maximum of 40 g / L VOC
EU VOC limit value for this product (cat A / c WB): 40 g / L
This product contains a maximum of 40 g / L VOC
Preparation mixture
Homogenise with the help of a spatula. Depending on the absorption of the base, the first layer will be diluted with 5 to 10% of water and the second with 2 to 5%
Soupliss
Decorative crack-bridging paint.
Field of Application
Exterior:
For application on:
- Concrete complying with standard P 18-210 (Ref: DTU 23.1.)
- Concrete resurfaced with Ragrecim or Ragrefix.
- Hydraulic-based coating EN 998.1 in accordance with standard NF P 15.201 (Ref. DTU 26.1) or Cement'in C+G or Cement'in Mega.
- Organic coatings: Scolofax, Granol KR/RP, etc.
For application on:
- Concrete complying with standard P 18-210 (Ref: DTU 23.1.)
- Concrete resurfaced with Ragrecim or Ragrefix.
- Hydraulic-based coating EN 998.1 in accordance with standard NF P 15.201 (Ref. DTU 26.1) or Cement'in C+G or Cement'in Mega.
- Organic coatings: Scolofax, Granol KR/RP, etc.
Characteristics
Soupliss is a decorative covering.
Its extension, adhesion properties and its covering capacity make it possible to mask and obliterate micro-cracks and cracking to give the façade a new, impermeable appearance.
For exterior walls only.
Soupliss has a large range of colours.
Its extension, adhesion properties and its covering capacity make it possible to mask and obliterate micro-cracks and cracking to give the façade a new, impermeable appearance.
For exterior walls only.
Soupliss has a large range of colours.
Preparation substrate
New substrates:
The preparation consists of stripping, brushing, washing, etc.
Old substrates:
Substrate should be checked prior to application. Preparation depends on the state or nature of the substrate.
For example: washing under pressure, stripping, decontamination, sandpapering of existing reliefs, recovery of coating, etc.
Old substrates covered in paint:
Substrate needs to be stripped (chemical: Façastrip Aqua, thermal or mechanical)
Old substrates covered with an organic render:
Ensure perfect adhesion of the render, wash and when necessary treat with Antimoss to remove any moss. To obtain a final smooth appearance, smooth the substrate with Scolofax ready-to-use smoothing paste.
The substrates can be painted using Soupliss diluted with a maximum of 15 % water which is about 250 g/m².
During the application and the drying phase, the ambient temperature and the surface temperature must not be below 10° C or above 30° C.
Paint should not be applied to a surface in the process of thawing or at risk of frost in the hours after application
The preparation consists of stripping, brushing, washing, etc.
Old substrates:
Substrate should be checked prior to application. Preparation depends on the state or nature of the substrate.
For example: washing under pressure, stripping, decontamination, sandpapering of existing reliefs, recovery of coating, etc.
Old substrates covered in paint:
Substrate needs to be stripped (chemical: Façastrip Aqua, thermal or mechanical)
Old substrates covered with an organic render:
Ensure perfect adhesion of the render, wash and when necessary treat with Antimoss to remove any moss. To obtain a final smooth appearance, smooth the substrate with Scolofax ready-to-use smoothing paste.
The substrates can be painted using Soupliss diluted with a maximum of 15 % water which is about 250 g/m².
During the application and the drying phase, the ambient temperature and the surface temperature must not be below 10° C or above 30° C.
Paint should not be applied to a surface in the process of thawing or at risk of frost in the hours after application
Application
Apply using a sheepskin roller. Depending on the finishing appearance wanted, a sheepskin roller or a honeycomb foam roller can be used.
Clean tools with water using a mild detergent.
Clean tools with water using a mild detergent.
Consumption
450 to 700 g/m² depending on the supstrate and the primer.
Technical data
Extension to breaking:
32 mm at 10°C after ageing
0.32 mm at 10°C after ageing
1.712 MPa (standard NF T 30 062)
Impermeability of the substrate:
no transit of water after 7 days (standard NF T 30 701)
Water vapour permeability:
52 g/24h m² (standard NF T 30 704)
Density
1,4 kg/dm³
Test report:
VERITAS N DSC/DCG/DLC/L 787204
Packaging
Soupliss is packed in a 20kg plastic buckets.
When stored in a dry place and in the unopened, original packaging the shelf life is 12 months from date of manufacture.
When stored in a dry place and in the unopened, original packaging the shelf life is 12 months from date of manufacture.
Remarks
Non-toxic product in accordance with 91/155/EWG.
The drying of aqueous phase coatings is a physical process of evaporation whose kinetics depends on the temperature, the levels of hygrometry and the replacement of air. Drying becomes very slow when relative hygrometry exceeds 70 %. When this level is around 100 %, drying stops altogether. Conversely, water evaporation is very quick and drying is accelerated by severe heat and strong wind.
Application must be carried out in compliance with standard NF P 74-002 Ref: DTU 59.2
The drying of aqueous phase coatings is a physical process of evaporation whose kinetics depends on the temperature, the levels of hygrometry and the replacement of air. Drying becomes very slow when relative hygrometry exceeds 70 %. When this level is around 100 %, drying stops altogether. Conversely, water evaporation is very quick and drying is accelerated by severe heat and strong wind.
Application must be carried out in compliance with standard NF P 74-002 Ref: DTU 59.2
Classification
Family I, Class 7b2 according to standard NF T36-005
EU VOC limit value for this product (cat A / c WB): 40 g / L
This product contains a maximum of 40 g / L VOC
EU VOC limit value for this product (cat A / c WB): 40 g / L
This product contains a maximum of 40 g / L VOC
Preparation mixture
Homogenise using a spatula and ensuring it's plasticity (no mixer)
