Standard mortars for masonry
Masonry mortar forms the basic bond between the bricks and/or blocks. That is why the mortar is the most important component of your house or building.
Mur 12/4
masonry mortar
Field of Application
Mur 12/4 is recommended for all masonry work, whether load-bearing or not, inside or out. For masonry of all types of bricks or traditional blocks.
Characteristics
Mur 12/4 is a dry ready-to-mix mortar based on cement for all conventional masonry.
Consumption
Yield: Mur 12 /4 1 tonne dry mortar: 600 litres 40 kg dry mortar: 24 litres 25 kg dry mortar: 15 litres
Technical data
Mur 12/4 SPS
masonry mortar
Field of Application
Mur 12/4 SPS is recommended for all masonry work, whether load-bearing or not, inside or out. For non-absorbent brick or block masonry.
Characteristics
Mur 12/4 SPS is a ready-to-mix cement-based mortar for non-absorbent or only slightly absorbent masonry block.
Consumption
Yield: 1 tonne dry mortar: 580 litres of masonry mortar 25 kg dry mortar: 14 litres of masonry mortar
Technical data
Particle size distribution
0 - 4 mm
Apparent density
± 1,900 kg/m³
Water requirement
± 10.5%
Spread
1.7
Air content
± 12%
Compression strength at 28 days
≥12 MPa
Flexural strength at 28 days
≥ 2.0 MPa
Adhesion at 28 days
≥ 0.2 MPa
Tradimur
masonry mortar with lime
Field of Application
Tradimur is recommended for all masonry work, whether load-bearing or not, inside or out. For masonry of all types of brick, lime-sand blocks or concrete blocks.
Tradimur is suitable for renewing old brickwork.
Tradimur is suitable for renewing old brickwork.
Characteristics
Tradimur is a cement-lime mortar, ready to mix, for all conventional masonry.
Consumption
Yield: 1 tonne dry mortar: 610 litres of masonry mortar 40 kg dry mortar: 25 litres of masonry mortar 25 kg dry mortar: 15 litres of masonry mortar
Technical data
Particle size distribution
0 - 2 mm
Apparent density
± 1,800 kg/m³
Water requirement
± 14%
Spread
1.7
Air content
± 15 %
Compression strength at 28 days
≥ 8 MPa
Flexural strength at 28 days
≥ 1.5 MPa
Adhesion at 28 days
≥ 0.2 MPa
