Joint mortars
This traditional joint mortar is available in an expansive colour palette and is suitable for new construction as well as renovation work.
Joint’in
Pointing mortar for brickwork
Field of Application
Joint'in is suitable for the final pointing of all brickwork, both in new constructions and in the event of renovations/restorations.
Joint'in creates joints of joint hardness category VH35 (manually densified), VH45 (pneumatically densified) in accordance with CUR recommendation 61.
Joint'in creates joints of joint hardness category VH35 (manually densified), VH45 (pneumatically densified) in accordance with CUR recommendation 61.
Characteristics
Joint'in is a premixed, water-repellent dry mortar for the final pointing of external brickwork.
Consumption
Yield :
± 550 L of concrete per ton dry mortar
± 14 L of concrete per 25 kg dry mortar
± 5,5 L of concrete per 10 kg dry mortar
± 2,8 L of concrete per 5 kg dry mortar
E.g.: ± 7 kg/m² for an area with stone dimensions of 210 x 100 x 50 mm
± 550 L of concrete per ton dry mortar
± 14 L of concrete per 25 kg dry mortar
± 5,5 L of concrete per 10 kg dry mortar
± 2,8 L of concrete per 5 kg dry mortar
E.g.: ± 7 kg/m² for an area with stone dimensions of 210 x 100 x 50 mm
Technical data
Granulometry
0/2 mm
Strength class (NBN EN 998-2)
M15
Dry bulk density
± 1,750 kg/m³
Mixing rate
± 9%
Dry density of hardened mortar
± 1900 kg/m³
Compression strength after 28 days
> 15 N/mm²
Hardness
class VH 35 (compacted manually), VH 45 (compacted mechanically)
Yield
± 550 L/ton
