Adhesive mortar for masonry
We offer suitable mortars for aerated concrete, cinderblocks and limestone blocks.
Cellucim
Thin layer masonry mortar/adhesive for aerated concrete
Field of Application
For assembling lightweight masonry blocks or aerated concrete.
For interior and exterior use.
For interior and exterior use.
Characteristics
Cellucim is a dry, ready-to-mix cementitious adhesive for laying aerated concrete blocks and calcium silicate blocks (mortar type T).
Because of its composition, Cellucim possesses high water retention, which ensures perfect adherence.
Because of its composition, Cellucim possesses high water retention, which ensures perfect adherence.
Consumption
For laying blocks with a thickness of:
- 20 cm: 3.6 kg/m²
- 30 cm: 5.5 kg/m²
Yield: 750 L/ton of dry mortar.
- 20 cm: 3.6 kg/m²
- 30 cm: 5.5 kg/m²
Yield: 750 L/ton of dry mortar.
Technical data
Compressive strength
category M10
Compressive strength at 28 days
15.0 N/mm²
Flexural strength at 28 days
> 3.0 N/mm²
Bond strength at 28 days
> 0.3 N/mm²
Grain size
0/0.5 mm
Water requirement
± 25%
Air content
± 20%
Water retention
± 100%
Flow rate/yield
750 L/ton
Density hardened mortar
± 1,500 kg/m³
Correction time
> 7 min.
